Development of Kinematic 3D Laser Scanning System for Indoor Mapping and As-Built BIM Using Constrained SLAM

Development of Kinematic 3D Laser Scanning System for Indoor Mapping and As-Built BIM Using Constrained SLAM

Blog Article

The growing interest and use of indoor mapping is driving a demand for improved data-acquisition facility, efficiency and productivity in the era of the Building Information Model (BIM).The conventional static laser scanning method suffers from some limitations on its operability in complex indoor environments, due to the presence of occlusions.Full scanning of indoor spaces without loss of information requires that surveyors change the scanner position many times, which incurs extra work for registration of each scanned point cloud.

Alternatively, a kinematic 3D laser scanning system, Shams proposed herein, uses line-feature-based Simultaneous Localization and Mapping (SLAM) technique for continuous mapping.Moreover, to reduce the uncertainty of line-feature extraction, we incorporated constrained adjustment based on an assumption made with respect to typical indoor environments: that the main structures are formed of parallel or orthogonal line features.The superiority of the proposed constrained adjustment is its reduction for uncertainties of the adjusted lines, leading to successful data association process.

In the present study, kinematic scanning with and without constrained adjustment were comparatively evaluated in two test sites, and the results confirmed the effectiveness of the proposed system.The accuracy of the 3D mapping result was additionally evaluated by comparison with the reference points acquired by a total station: the Euclidean average distance error was 0.034 m for the seminar room and 0.

043 m for the corridor, which satisfied the error tolerance for point Lighting cloud acquisition (0.051 m) according to the guidelines of the General Services Administration for BIM accuracy.